Altera DK-DEV-10M50-A MAX10 Development Kit EtherNet for Cyclone V SoC Development Kit

MAX 10 FPGA Development Kit, Altera

The Altera MAX 10 FPGA development kit is a full featured design platform built around a 50 K logic elements (LEs). It is optimised for system level integration with on-die ADC, dual-configuration flash, and DDR3 memory interface support. It has a range of connectivity options including an on-board USB-Blaster II, HDMI output, and dual Ethernet for industrial Ethernet applications. The MAX 10 FPGA Development Kit provides a system-level prototyping solution for industrial, automotive and consumer applications.
With the Altera MAX 10 FPGA Development Kit, you can:

• - Develop designs for the 10M50D, F484 package FPGA
• - Measure the performance of the MAX 10 FPGA ADC block conversion
• - Interface MAX 10 FPGAs to DDR3 memory at 300 MHz performance
• - Run embedded Linux using the Nios II processor
• - Interface to daughter cards and peripherals using HSMC and Digilent Pmod Compatible connectors
• - Measure FPGA power using the power monitor graphical user interface (GUI)
• - Reuse the PCB board and schematic as a model for your design
• Programming and Configuration
• - Embedded USB-Blaster II (JTAG)
• - Optional JTAG direct via 10-pin header
• Memory Devices
• - 64-Mx16 1 GB DDR3 SDRAM with soft memory controller
• - 128-Mx8 1 GB DDR3 SDRAM with soft memory controller
• - 512 MB Quad serial peripheral interface (quad SPI) flash
• Communication Ports
• - 2 x Gigabit Ethernet RJ-45 ports
• - mini-USB2.0 UART
• - HDMI video output
• - Universal high-speed mezzanine card (HSMC) connector
• - 2 x 12-pin Digilent Pmod compatible connectors
• Analogue
• - 2 x MAX 10 FPGA ADC SMA inputs
• - 2 x 10 ADC header
• - Potentiometer input to ADC
• - External 16-bit DAC with SMA output
• Clocking
• - 25 MHz single-ended, external oscillator clock source
• - Silicon labs clock generator
• Supplied with
• - Mini USB cable for on-board USB-Blaster II
• - 2A Power Supply and cable
• - Free Quartus II Web Edition design software

Featured Devices

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.