Artesyn Embedded Technologies Embedded Switch Mode Power Supply SMPS, LPQ172-C, 5 V dc, ±12 V dc, 3 A, 5 A, 8 A, 30 A,

Artesyn Embedded Technologies Embedded Switch Mode Power Supply

The Artesyn Embedded Technologies embedded switch-mode power supply from the LPQ172 series is a 110W rated, AC to DC plug-in device with 4 outputs. This AC power adapter has an outputs 1, 3 and 4 that are adjustable, along with adjustable, 4th floating output. This power supply has active power factor correction, a low output ripple and a built-in EMI filter. A cover is also supplied with this AC power supply. It has a universal input supply voltage rating range from 85VAC to 264VAC and 120VDC to 300VDC.
Note:
The 75W output power rating for this AC/DC power supply is based on a convection rating with a cover fitted, without which the rating would be 110W. The maximum 175W output power for this AC/DC power supply can only be obtained using a cooling fan giving 30cfm forced air, but with a cover fitted this would be 130W
Derating from 50°C to 70°C is 2.5% per °C

Features and Benefits

• Built-in EMI filter
  Efficiency of 75% typical at full load
  Low output ripple
  Output currents are 3A at 5V, 5A at 12V, 8A at -12V and 30A at ±5 to 25V
  Overload and thermal overload protection
  Overvoltage
  Power fail and remote inhibit
  Safety ground leakage current of 1.00mA at 50Hz to 60Hz, 264VAC input
  Single wire current sharing
  Standby output 5V

Certifications

• BABT
  BABT: EN60950/BS7002
  CB
  CISPR 22 class B conducted
  CSA 22.2-234 level 3
  CSA certified
  EMC compliance to FCC class B conducted
  EN55022 class B conducted
  EN61000-3-2
  IEC EN6100-3-2(Active power factor correction compliance)
  NEMKO
  NEMKO: EN 60950/EMKO-TUE (74 sec) 203
  PT3 class B conducted
  UL recognised
  UL1950
  VDE
  VDE 0878
  VDE: 0805/EN60950 (IEC950)

Approvals

VDE; UL Recognised; CSA Certified; NEMKO; BABT