Bartec Bartec Series 2 Position Selector Switch Head, Black Handle
Tekninen dokumentti
Tekniset tiedot
Merkki
BartecActuator Colour
Black
Illuminated
No
Number of Positions
2
Actuator Type
Standard Handle
Switch Actuation
Latching
Series
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Alkuperämaa
Germany
Tuotetiedot
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 52,00
kpl (ilman ALV)
€ 65,26
kpl (Sis ALV:n)
1
€ 52,00
kpl (ilman ALV)
€ 65,26
kpl (Sis ALV:n)
1
Osta irtotavarana
| Määrä | Yksikköhinta |
|---|---|
| 1 - 4 | € 52,00 |
| 5 - 9 | € 50,00 |
| 10+ | € 47,60 |
Tekninen dokumentti
Tekniset tiedot
Merkki
BartecActuator Colour
Black
Illuminated
No
Number of Positions
2
Actuator Type
Standard Handle
Switch Actuation
Latching
Series
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Alkuperämaa
Germany
Tuotetiedot
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.