Tekninen dokumentti
Tekniset tiedot
Merkki
Renesas ElectronicsMounting Type
Through Hole
Timer Type
Standard
Package Type
PDIP
Number of Internal Timers
2
Pin Count
14
Maximum Input Frequency
1MHz
Minimum Operating Supply Voltage
2 V
Maximum Operating Supply Voltage
18 V
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+85 °C
Maximum Low Level Output Current
20mA
Maximum High Level Output Current
-0.8mA
Length
19.68mm
Height
4.95mm
Width
7.11mm
Dimensions
19.68 x 7.11 x 4.95mm
Alkuperämaa
Philippines
Tuotetiedot
555 Timer, Intersil
Intersil offers the 555 timer, a highly stable controller capable of producing accurate timing pulses. With monostable operation, you control the time delay by one external resistor and one capacitor. With a stable operation, the frequency and duty cycle are accurately controlled with two external resistors and one capacitor.
Timers/Timing Generators
Varastotiedot eivät ole tilapäisesti saatavilla.
Tarkista myöhemmin uudelleen.
€ 67,50
€ 1,35 kpl (toimitus putkessa) (ilman ALV)
€ 84,71
€ 1,694 kpl (toimitus putkessa) (Sis ALV:n)
Tuotantopakkaus (Putki)
50
€ 67,50
€ 1,35 kpl (toimitus putkessa) (ilman ALV)
€ 84,71
€ 1,694 kpl (toimitus putkessa) (Sis ALV:n)
Tuotantopakkaus (Putki)
50
Osta irtotavarana
Määrä | Yksikköhinta | Per Putki |
---|---|---|
50 - 95 | € 1,35 | € 6,75 |
100 - 245 | € 1,20 | € 6,00 |
250 - 495 | € 1,10 | € 5,50 |
500+ | € 1,05 | € 5,25 |
Tekninen dokumentti
Tekniset tiedot
Merkki
Renesas ElectronicsMounting Type
Through Hole
Timer Type
Standard
Package Type
PDIP
Number of Internal Timers
2
Pin Count
14
Maximum Input Frequency
1MHz
Minimum Operating Supply Voltage
2 V
Maximum Operating Supply Voltage
18 V
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+85 °C
Maximum Low Level Output Current
20mA
Maximum High Level Output Current
-0.8mA
Length
19.68mm
Height
4.95mm
Width
7.11mm
Dimensions
19.68 x 7.11 x 4.95mm
Alkuperämaa
Philippines
Tuotetiedot
555 Timer, Intersil
Intersil offers the 555 timer, a highly stable controller capable of producing accurate timing pulses. With monostable operation, you control the time delay by one external resistor and one capacitor. With a stable operation, the frequency and duty cycle are accurately controlled with two external resistors and one capacitor.