Tekninen Dokumentti
Tekniset tiedot
Merkki
Renesas ElectronicsProduct Type
Multiprotocol Transceiver
Number of Transmitters
2
Number of Receivers
2
Number of Transceivers
2
Mount Type
Surface
Package Type
QFN
Pin Count
40
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Interface Standards
No
Length
6mm
Height
900μm
Standards/Approvals
RoHS
Width
6mm
Series
ISL3331
Supply Current
3.7mA
Automotive Standard
No
Tuotetiedot
The Renesas Dual Protocol (RS-232/RS-485) Transceiver is BiCMOS Interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3.15V. Four small 0.1μF capacitors are required for the charge pump. The transceivers are RS-232 compliant with the Rx inputs handling up to ±25V.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 470,00
€ 9,40 1 kpl (50 kpl/putki) (ilman ALV)
€ 589,85
€ 11,797 1 kpl (50 kpl/putki) (Sis ALV:n)
50
€ 470,00
€ 9,40 1 kpl (50 kpl/putki) (ilman ALV)
€ 589,85
€ 11,797 1 kpl (50 kpl/putki) (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
50
Tekninen Dokumentti
Tekniset tiedot
Merkki
Renesas ElectronicsProduct Type
Multiprotocol Transceiver
Number of Transmitters
2
Number of Receivers
2
Number of Transceivers
2
Mount Type
Surface
Package Type
QFN
Pin Count
40
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Interface Standards
No
Length
6mm
Height
900μm
Standards/Approvals
RoHS
Width
6mm
Series
ISL3331
Supply Current
3.7mA
Automotive Standard
No
Tuotetiedot
The Renesas Dual Protocol (RS-232/RS-485) Transceiver is BiCMOS Interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3.15V. Four small 0.1μF capacitors are required for the charge pump. The transceivers are RS-232 compliant with the Rx inputs handling up to ±25V.