Tekninen Dokumentti
Tekniset tiedot
Merkki
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Number of Cells
2
Sub Type
Battery Holder
Mount Type
Chassis
Body Material
Polypropylene
Termination Type
Coil Spring
Length
52.3mm
Standards/Approvals
No
Width
24.7mm
Height
13mm
Diameter
10.1mm
Series
SN
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 1,85
€ 1,85 kpl (ilman ALV)
€ 2,32
€ 2,32 kpl (Sis ALV:n)
1
€ 1,85
€ 1,85 kpl (ilman ALV)
€ 2,32
€ 2,32 kpl (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
1
Tekninen Dokumentti
Tekniset tiedot
Merkki
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Number of Cells
2
Sub Type
Battery Holder
Mount Type
Chassis
Body Material
Polypropylene
Termination Type
Coil Spring
Length
52.3mm
Standards/Approvals
No
Width
24.7mm
Height
13mm
Diameter
10.1mm
Series
SN
Alkuperämaa
Taiwan, Province Of China
Tuotetiedot
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
