Tekninen Dokumentti
Tekniset tiedot
Merkki
RS ProProduct Type
ESD Tester
Power Source
Battery
Test Point
Surface
Supply Voltage
9V
Depth
32mm
Height
130mm
Display Type
LED
Standards/Approvals
ENCE
Width
70mm
Alkuperämaa
United States
Tuotetiedot
This RS PRO Surface ESD (Electrostatic Discharge) tester is fitted with built-in parallel electrodes for a quick test of material surface resistivity. Two 4 mm plug sockets and an electrode selection switch allow the connection of external 2.27 kg electrodes to measure surface resistance point to point (Rp-p) or resistance to protective earth ground (Rg).
Resistance is indicated via a row of ten LEDs. As the electrification period is important when measuring surface resistance or resistivity, a 15-second timer has been fitted within the checker. The unit is fitted with an automatic test voltage selection; the test voltage will switch from 10 V to 100V should the measured resistance exceed 1x 105 ohms.
The ESD tester is a handy device for ensuring compliance to qualify for listing an EPA (ESD protected areas) in an ESD control plan, during the installation of equipment and for periodic auditing of ESD protective products.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 590,00
€ 590,00 kpl (ilman ALV)
€ 740,45
€ 740,45 kpl (Sis ALV:n)
1
€ 590,00
€ 590,00 kpl (ilman ALV)
€ 740,45
€ 740,45 kpl (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
1
Tekninen Dokumentti
Tekniset tiedot
Merkki
RS ProProduct Type
ESD Tester
Power Source
Battery
Test Point
Surface
Supply Voltage
9V
Depth
32mm
Height
130mm
Display Type
LED
Standards/Approvals
ENCE
Width
70mm
Alkuperämaa
United States
Tuotetiedot
This RS PRO Surface ESD (Electrostatic Discharge) tester is fitted with built-in parallel electrodes for a quick test of material surface resistivity. Two 4 mm plug sockets and an electrode selection switch allow the connection of external 2.27 kg electrodes to measure surface resistance point to point (Rp-p) or resistance to protective earth ground (Rg).
Resistance is indicated via a row of ten LEDs. As the electrification period is important when measuring surface resistance or resistivity, a 15-second timer has been fitted within the checker. The unit is fitted with an automatic test voltage selection; the test voltage will switch from 10 V to 100V should the measured resistance exceed 1x 105 ohms.
The ESD tester is a handy device for ensuring compliance to qualify for listing an EPA (ESD protected areas) in an ESD control plan, during the installation of equipment and for periodic auditing of ESD protective products.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
