Tekninen Dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsOutput Current
200mA
Product Type
Lighting Controller
Input Voltage Type
DC
Dimming Operation
Analogue
Mount Type
Surface
Package Type
QFN
Number of Pins
24
Maximum Output Voltage
42V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
5.1mm
Height
0.9mm
Standards/Approvals
RoHS
Series
ALED7709ATR
Minimum Output Voltage
4.5V
Automotive Standard
AEC-Q100
Alkuperämaa
Thailand
Tuotetiedot
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 5 700,00
€ 1,90 1 kpl (3000 kpl/kela) (ilman ALV)
€ 7 153,50
€ 2,384 1 kpl (3000 kpl/kela) (Sis ALV:n)
3000
€ 5 700,00
€ 1,90 1 kpl (3000 kpl/kela) (ilman ALV)
€ 7 153,50
€ 2,384 1 kpl (3000 kpl/kela) (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
3000
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
Tekninen Dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsOutput Current
200mA
Product Type
Lighting Controller
Input Voltage Type
DC
Dimming Operation
Analogue
Mount Type
Surface
Package Type
QFN
Number of Pins
24
Maximum Output Voltage
42V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
5.1mm
Height
0.9mm
Standards/Approvals
RoHS
Series
ALED7709ATR
Minimum Output Voltage
4.5V
Automotive Standard
AEC-Q100
Alkuperämaa
Thailand
Tuotetiedot
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
