Tekninen Dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
550μA
Maximum Source Current
-700mA
Sub Type
Power Factor Controller IC
Maximum Sink Current
1.5A
Switching Frequency
130kHz
Supply Current
25mA
Mount Type
Surface
Package Type
SSOP-10
Minimum Supply Voltage
10V
Pin Count
10
Maximum Supply Voltage
24.5V
Minimum Operating Temperature
-40°C
Length
5mm
Height
1.75mm
Standards/Approvals
JEIDA-MITI, EN 61000-3-2, IEC 60601-1-2
Series
L4986
Maximum Operating Temperature
150°C
Automotive Standard
No
Tuotetiedot
The STMicroelectronics continuous conduction mode power factor correction controller with high voltage start-up to boost converter with a proprietary multiplier "emulator" which in addition to the innovative THD optimizers guarantee very low total harmonic distortion (THD) performance in all operating conditions. This device comes in a pin SSOP10 package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 77,00
€ 3,85 kpl (toimitus putkessa) (ilman ALV)
€ 96,64
€ 4,832 kpl (toimitus putkessa) (Sis ALV:n)
Tuotantopakkaus (Putki)
20
€ 77,00
€ 3,85 kpl (toimitus putkessa) (ilman ALV)
€ 96,64
€ 4,832 kpl (toimitus putkessa) (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
Tuotantopakkaus (Putki)
20
| Määrä | Yksikköhinta | Per Putki |
|---|---|---|
| 20 - 98 | € 3,85 | € 7,70 |
| 100 - 198 | € 2,95 | € 5,90 |
| 200+ | € 2,60 | € 5,20 |
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
Tekninen Dokumentti
Tekniset tiedot
Merkki
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
550μA
Maximum Source Current
-700mA
Sub Type
Power Factor Controller IC
Maximum Sink Current
1.5A
Switching Frequency
130kHz
Supply Current
25mA
Mount Type
Surface
Package Type
SSOP-10
Minimum Supply Voltage
10V
Pin Count
10
Maximum Supply Voltage
24.5V
Minimum Operating Temperature
-40°C
Length
5mm
Height
1.75mm
Standards/Approvals
JEIDA-MITI, EN 61000-3-2, IEC 60601-1-2
Series
L4986
Maximum Operating Temperature
150°C
Automotive Standard
No
Tuotetiedot
The STMicroelectronics continuous conduction mode power factor correction controller with high voltage start-up to boost converter with a proprietary multiplier "emulator" which in addition to the innovative THD optimizers guarantee very low total harmonic distortion (THD) performance in all operating conditions. This device comes in a pin SSOP10 package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.
Ideoi. Luo. Tee yhteistyötä
LIITY ILMAISEKSI
Ei piilokuluja!
