Tekninen Dokumentti
Tekniset tiedot
Merkki
TE ConnectivityProduct Type
Solder Sleeve
Sleeve Length
32.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Alkuperämaa
Mexico
Tuotetiedot
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 160,00
€ 1,60 1 kpl (100 kpl/pakkaus) (ilman ALV)
€ 200,80
€ 2,008 1 kpl (100 kpl/pakkaus) (Sis ALV:n)
100
€ 160,00
€ 1,60 1 kpl (100 kpl/pakkaus) (ilman ALV)
€ 200,80
€ 2,008 1 kpl (100 kpl/pakkaus) (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
100
| Määrä | Yksikköhinta | Per Pakkaus |
|---|---|---|
| 100 - 1400 | € 1,60 | € 160,00 |
| 1500 - 4900 | € 1,50 | € 150,00 |
| 5000+ | € 1,45 | € 145,00 |
Tekninen Dokumentti
Tekniset tiedot
Merkki
TE ConnectivityProduct Type
Solder Sleeve
Sleeve Length
32.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Alkuperämaa
Mexico
Tuotetiedot
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
