Tekninen Dokumentti
Tekniset tiedot
Merkki
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
45.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Alkuperämaa
Mexico
Tuotetiedot
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Varastotiedot eivät ole tilapäisesti saatavilla.
€ 160,00
€ 160,00 25 kpl:n pakkaus (ilman ALV)
€ 200,80
€ 200,80 25 kpl:n pakkaus (Sis ALV:n)
1
€ 160,00
€ 160,00 25 kpl:n pakkaus (ilman ALV)
€ 200,80
€ 200,80 25 kpl:n pakkaus (Sis ALV:n)
Varastotiedot eivät ole tilapäisesti saatavilla.
1
Tekninen Dokumentti
Tekniset tiedot
Merkki
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
45.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Alkuperämaa
Mexico
Tuotetiedot
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
